Milwaukee 2401-22 information from Consumer Reports

< Go to Cordless drills & tool kits page

Milwaukee 2401-22

Price range:

$99.00 - $161.00

Summary: This 12-volt cordless screwdriver from Milwaukee has a 1/4-inch chuck and one speed. It comes with two Li-Ion batteries and a smart charger.

Own this Model?

Write a review

Type: Cordless screwdrivers

About - Milwaukee 2401-22
The Milwaukee 2401-22 is part of the cordless drill & tool kit test program at Consumer Reports. In our lab tests, cordless drill models like the 2401-22 are rated on multiple criteria, such as those listed below. Speed: Speed of drilling and driving screws. Power: Twisting force for tightening and loosening. Run time: This reflects how much work the drill can perform per battery charge, as measured on a dynamometer.

About - Milwaukee 2401-22

The Milwaukee 2401-22 is part of the cordless drill & tool kit test program at Consumer Reports. In our lab tests, cordless drill models like the 2401-22 are rated on multiple criteria, such as those listed below.

Speed:: Speed of drilling and driving screws.
Power:: Twisting force for tightening and loosening.
Run time:: This reflects how much work the drill can perform per battery charge, as measured on a dynamometer.

Features & Specs - Milwaukee 2401-22
Battery type The type of batteries provided with the drill. All are rechargeable. The more common type is denoted NiCd, for its nickel-cadmium components. Nickel-metal hydride (NiMH) batteries boast added energy for their weight. Lithium-ion (Li-Ion) batteries are the latest type and deliver even more power in a smaller size. Lithium-ion and NiMH batteries can be disposed of with regular refuse; NiCd must be recycled. Battery type	Li
Battery recharge time (in minutes) The time it takes to completely recharge a battery after it has properly cooled down. Most of the fast chargers have a built-in temperature sensor that delays the charging cycle when the battery is too hot from recent heavy use until the battery has cooled. Battery recharge time (in minutes)	30
Speed ranges Many cordless drills have two separate speed ranges, or gear ratios; some newer models have three. The slower speed range peaks at about 400 revolutions per minute (rpm) and provides increased torque (twisting force) for driving large screws. A higher speed range that reaches about 1,500 rpm or more, is well suited for rapid drilling. Lower-priced drills usually have a single speed range that tops out at approximately 600 to 800 rpm, compromising both driving and drilling performance. Speed ranges	1
More features and specs

User Reviews - Milwaukee 2401-22

Consumer Reports User Reviews

Already own it? Write a review

There are no reviews from Consumer Reports subscribers. Be the first Consumer Reports subscriber to review this product.

Write a review

Other User Reviews

There are 0 reviews from the web

Recommended Ratings

Nobody Tests Like We Do: Our testers put 100s of products through their paces at our National Testing and Research Center. Learn more about how we test for:; Performance; Safety; Reliability; Learn more

To find the model that is right for you, read our expert advice on which features to consider and how to find the best value. Here's one tip: Don't pay for more features than you'll use.

Cordless drills & tool kits

ConsumerReports.org

Consumer Reports Network