Rockwell RC2122K information from Consumer Reports

< Go to Cordless drills & tool kits page

Rockwell RC2122K

Approximate retail price:

$39.00

Summary: This 12-volt model from Rockwell has a 3/8-inch chuck, one speed range, and an LED work light. It comes with one NiCd battery.

Own this Model?

Write a review

Type: Light use drill/drivers

About - Rockwell RC2122K
The Rockwell RC2122K is part of the cordless drill & tool kit test program at Consumer Reports. In our lab tests, cordless drill models like the RC2122K are rated on multiple criteria, such as those listed below. Speed: Speed of drilling and driving screws. Power: Twisting force for tightening and loosening. Run time: This reflects how much work the drill can perform per battery charge, as measured on a dynamometer.

About - Rockwell RC2122K

The Rockwell RC2122K is part of the cordless drill & tool kit test program at Consumer Reports. In our lab tests, cordless drill models like the RC2122K are rated on multiple criteria, such as those listed below.

Speed:: Speed of drilling and driving screws.
Power:: Twisting force for tightening and loosening.
Run time:: This reflects how much work the drill can perform per battery charge, as measured on a dynamometer.

Features & Specs - Rockwell RC2122K
Battery type The type of batteries provided with the drill. All are rechargeable. The more common type is denoted NiCd, for its nickel-cadmium components. Nickel-metal hydride (NiMH) batteries boast added energy for their weight. Lithium-ion (Li-Ion) batteries are the latest type and deliver even more power in a smaller size. Lithium-ion and NiMH batteries can be disposed of with regular refuse; NiCd must be recycled. Battery type	NiCd
Battery recharge time (in minutes) The time it takes to completely recharge a battery after it has properly cooled down. Most of the fast chargers have a built-in temperature sensor that delays the charging cycle when the battery is too hot from recent heavy use until the battery has cooled. Battery recharge time (in minutes)	3-5 hr
Speed ranges Many cordless drills have two separate speed ranges, or gear ratios; some newer models have three. The slower speed range peaks at about 400 revolutions per minute (rpm) and provides increased torque (twisting force) for driving large screws. A higher speed range that reaches about 1,500 rpm or more, is well suited for rapid drilling. Lower-priced drills usually have a single speed range that tops out at approximately 600 to 800 rpm, compromising both driving and drilling performance. Speed ranges	1
More features and specs

User Reviews - Rockwell RC2122K

Consumer Reports User Reviews

Already own it? Write a review

There are no reviews from Consumer Reports subscribers. Be the first Consumer Reports subscriber to review this product.

Write a review

Other User Reviews

There are 0 reviews from the web

Recommended Ratings

Nobody Tests Like We Do: Our testers put 100s of products through their paces at our National Testing and Research Center. Learn more about how we test for:; Performance; Safety; Reliability; Learn more

To find the model that is right for you, read our expert advice on which features to consider and how to find the best value. Here's one tip: Don't pay for more features than you'll use.

Cordless drills & tool kits

ConsumerReports.org

Consumer Reports Network